cam sensor issue

[C. J.]

is this the right one simon and is it B10 http://www.northursalia.com/modifica...ng/wrxpin.html

[Jolly Green Monster]

having looked at the pinout in detail I would be inclined to ground the pins marked as grounds at the end B19, C8, C18, C17, A22, A7 and A15.. just be careful as the plug blocks are not in the order you would expect and there are blanks in the plugs with no pins whcih you need to count etc.. I would get a volt meter and check each one is a ground before grounding it also.

Simon

[C. J.]

right o
I take it the pin places on the UK is the same as a US?

[C. J.]

Done all of the above what about MAF ground E7 ?

[Jolly Green Monster]

I don't think it necessary..

Simon

[C. J.]

Originally Posted by Jolly Green Monster

I don't think it necessary..

Simon

See you thursday then

[Jolly Green Monster]

will do

how has it been driving?

[C. J.]

not good feels lumpy at 2500 dont think the problem is solved , but have not driven it out of town since doing the earthing . will try to later and let you know

[Jolly Green Monster]

running out of ideas if it is still doing it

[C. J.]

Seems ok if you drop a gear but if in 6th and floor it it makes a growning noise . may just me being paronoid !