![]() |
|
#1
|
|||
|
|||
|
Mapping question
Hell mate, you mapped my car not so long ago td-05 20g newage at SRR. Now because I now have the itch for more and my turbo is at 1.3 bar could this be increased with other mods? I was planing on a FMIC boost controller and bigger injectors as mine are maxed. Or is it the case that the turbo is maxed and so the other mods wont really make much of a difference? Many thanks. James
__________________
12.6@113 more to come TFS RACING |
| Sponsored Links |
|
#2
|
||||
|
||||
|
injectors were the only reason I stopped at 1.3bar.
fmic and injectors needed to go further still made 392bhp though iirc? so not masses left in the turbo. Simon
__________________
www.JollyGreenMonster.co.uk |
|
#3
|
|||
|
|||
|
Yep still made 392 and a hell of a lot quicker than before. Will get some bigger injectors, 3 port and Fmic and will contact you for another map when done. Many thanks. James
__________________
12.6@113 more to come TFS RACING |
|
#4
|
||||
|
||||
|
I would expect it to be 400 with more torque when the boost is upped etc
if you want lots more than bigger turbo needed but obviously you can spend and spend lol
__________________
www.JollyGreenMonster.co.uk |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Autronic ecu question | spongebob | Technical | 0 | 13-06-2009 21:59 |
| Insurance question. | gar | Chatter | 10 | 21-09-2007 16:04 |
| MOT General Question | Pink Bunny | Chatter | 10 | 17-01-2007 21:07 |
| Another question... | Wakey | Chatter | 6 | 14-04-2005 10:42 |